Skip to main content.

NetBSD/amiga

 amiga-logo

About NetBSD/amiga

NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by Commodore and Amiga International and to the DraCo by MacroSystem GmbH.

Development activity on NetBSD/amiga continues at a speed dependent on people's spare time. Currently, NetBSD/amiga runs on any Amiga [1] that has a Motorola 68020 or better CPU with some form of MMU, and on 68060 DraCos. For 68020 and 68030 systems, a FPU is recommended but not required. 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.

Due to the MMU requirement, it will not run on A500, A600, A1000, A1200, A2000, A4000/EC030, CDTV or CD32 out of the box. You must install a CPU board on them to run NetBSD.

The minimum RAM requirement is about 8 MB FASTMEM, the minimum hard disk space needed is about 75 MB, depending on how much system components you install. Check the install document for more details.

NetBSD/amiga News

2011-08-04:   PCI bus support
Basic support for PCI bus was commited in -current, along with the driver for Phase5 PCI bridge, present on CyberVision PPC and BlizzardVision PPC cards.
2011-01-14:   BlizzardPPC SCSI driver
Radoslaw Kujawa submitted a driver for the 53c710 based host adapter found on BlizzardPPC 603e+ boards.
2007-08-20:   Driver for Buddha and Catweasel/Z2
The Buddha and Catweasel/Z2 IDE controllers from Individual Computers are supported by wdc(4).
2003-11-12:   Wscons PAL support
Jukka Andberg has added screen types suitable for PAL display to amidisplaycc(4), enabling PAL support for wscons.

Archive of NetBSD/amiga news items

Supported hardware

  • IDE controllers:

    • A4000/A1200 builtin
    • Buddha, Catweasel/Z2

  • SCSI host adapters:

    • 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo accellerator, GVP series II
    • 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync, Emplant [2]
    • 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+, Magnum, Warp Engine, Zeus, DraCo builtin SCSI
    • FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV, Blizzard 2060, CyberSCSI Mk I and II
    • Cyberstorm Mk III / Cyberstorm PPC

  • PCI bridges:

    • Phase5 PCI bridge: CyberVision PPC, BlizzardVision PPC

  • Video controllers:

    • ECS, AGA and A2024 built in on various Amigas
    • Retina Z2 [3], Retina Z3, Altais
    • Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV, Piccolo, Piccolo SD64
    • Tseng ET4000 based boards: Domino and Domino16M proto, oMniBus, Merlin
    • A2410[3]
    • Cybervision 64
    • Cybervision 64/3D

  • Audio I/O:

    • Amiga builtin (8bit and 14bit modes)
    • Melody Mpeg-audio layer 2 board [4]
    • Repulse audio board
    • Toccata audio board

  • Ethernet controllers:

    • A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet
    • AriadneII Ethernet
    • X-surf Ethernet port
    • Some PCMCIA cards in the A1200 (tested with a few network cards only)

  • ARCnet controllers:

    • A2060 ARCnet

  • ISDN controllers:

    • BSC ISDN Master
    • BSC ISDN Master II
    • ITH ISDN Master II[4]
    • VMC ISDN Blaster
    • Zeus Development ISDN link
    • Individual Computers ISDN Surfer

  • Tape drives:

    • Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150

  • Scanners: With the machine independent PINT interface integrated, these should work:

    • SCSI-2 scanners behaving as SCSI-2 scanner devices
    • HP Scanjet II [5]
    • Mustek SCSI scanner[5]

  • CD-ROM drives:

    • Most SCSI CD-ROM drives

  • Serial ports on these boards:

    • Amiga builtin
    • DraCo builtin, including serial mouse port
    • A2232 (normal and turbo modes)
    • MultiFaceCard II and III
    • HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport models!)

  • Parallel printer ports on these boards:

    • Amiga builtin
    • DraCo builtin
    • HyperCom 3+ and 4+
  • Amiga floppy drives with Amiga (880kB/1760kB) and IBM (720kB/1440 kB) block encoding.
  • Amiga mouse.
  • Real-time clocks: A2000, A3000, A4000 builtin; DraCo builtin (r/o); A2000-RTC-clone on some A1200 accelerator boards.

NetBSD/amiga Information

Mailing Lists

Current Releases

Future Releases

Related Links

[1] There has been a report that the GVP '030/50MHz accelerator only works when all memory banks are switched to “Extended” (J12?).

[2] The Emplant SCSI adapter has been reported by a party to hang after doing part of the installation without problems.

[3] No X server for Retina Z2 and A2410, currently.

[4] The DraCo Zorro-2 bus does not recognize a couple of boards (known: Melody Z2, ITH ISDN Master II). Worse: boards in ConfigIn/ConfigOut order behind them won't be found, either. This is not a NetBSD problem, but a design problem in the board (yes, right).

[5] There are reports that the Mustek and HP Scanjet scanners hang if accessed from the A3000. This might apply to other 33C93-adapters, too.